F919SC Biofilm Remover is an alkaline heavy-duty cleanser with an emulsifying action for removing biofilms from hard surfaces.
It also incorporates a wetting agent for effective coverage and a soil suspension agent to facilitate easy removal.
Available in 1 litre and 5 litre bottles.
Use
biocides safely. Always read the label and product information before use.
Veterinary surgeons - this product can be ordered through your wholesaler, or contact us for ordering information
F919SC Biofilm Remover should be used on a weekly basis to
remove 'films' harbouring a build-up of micro-organisms that detergent
based cleaning products leave behind.
Use on:
Hard surfaces in medical and
veterinary facilities
Animal Housing
Mechanism of action is not reliant
upon a mechanical brushing/scrubbing action, but interacts chemically
with the organic film to release it from the surface and take it up into
suspension where it can be washed away. The clean surface can then be
effectively disinfected.
F919SC Biofilm Remover can be applied as a wash, or by using a spray or high-pressure equipment, and its low foaming action also make it suitable for use in CIP systems or crate washes. It is effective in both hot and cold water, and is often used to replace hazardous caustic based products.
NOTE: Although from the same manufacturers, Health and Hygiene, F919SC Biofilm Remover does not have the same properties as the F10 range of products. It is designed to be a degreaser and as such does not disinfect (although the removal of biofilms by this product does aid in making the disinfecting process more efficient). It should also not come into direct contact with users or their animals.
IMPORTANT: F919SC Biofilm Remover should not come in contact with animals or users skin and should be washed off. It is recommended that the user wears rubber gloves, and if the skin comes in to contact with the solution it is washed with soap and water and a rehydrating hand cream be applied.
Clear away debris
Wash down the surface/item - ideally with hot water
Immediately apply a solution of F919SC Biofilm Remover (see below for dilution rates)
After a contact time of approximately 5 minutes, but before the surface dries, vigorously brush off, or use a high pressure washer to clean the surface
On vertical surfaces with heavy soiling it may be necessary to repeat the process to remove all deposits
The following dilution rates are recommended:
For lightly soiled surfaces add 40ml to 10 litres of clean water (or equivalent to create a 1:250 solution)
For biofilms add 100ml to 10 litres of preferably warm to hot water (or equivalent to create a 1:100 solution)
For resistant biofilms add 200ml to 10 litres of hot water (or equivalent to create a 1:50 solution)
A broad spectrum disinfectant, effective against all types of pathogen, without cleaning detergent
The same spectrum of kill as
F10®SC but with added cleaning detergent
F10®SC pre-diluted at 1:250, so can be used straight from the bottle
Although from the same manufacturers, Health and Hygiene (Pty) Ltd, F919SC Biofilm Remover does not have the same properties as the F10® range of products. It is designed to be a degreaser and as such does not disinfect (although the removal of biofilms by this product does aid in making the disinfecting process more efficient). It should also not come into direct contact with users or their animals.
Causes severe burns and eye damage
If swallowed, rinse with water
We are happy to help, and advise on the use of this product and how it can fit with your hygiene regime. Please contact us for any information.
The F10® product range is developed and manufactured by Health and Hygiene (Pty) Ltd in South Africa.
Almost all plastic elements used in the packaging of F10®
products are made from HDPE 2 materials and are widely recycled. This
includes the bottles, caps, pumps, sprays, tubes and tubs.
© Meadow's Animal Healthcare, 2022
All images which are copyright of Meadow's Animal
Healthcare, Harrison's Bird Foods and Health & Hygiene Pty Ltd may not be re-used without
permission