F10®CLXD Veterinary Disinfectant/Cleanser

F10®CLXD Veterinary Disinfectant/Cleanser has the same broad spectrum of kill as F10®CL Veterinary Disinfectant but with added detergent to provide a ‘one-step’ product for light duty cleaning and disinfection in routine hygiene applications. It is a soapy liquid with a slight pine fragrance and a green appearance.

At working dilutions it is non-corrosive, non-tainting and non-irritating, and is also chlorine- and aldehyde-free.

Available in 5 litre bottles.

The F10®SCXD and F10®CLXD products are chemically the same but CLXD is 5 times more dilute than the SCXD (Super Concentrate). So 5 litres of CLXD is equivalent to 1 litre of SCXD in terms of the amount of disinfection cleansing that it can do.

Use biocides safely. Always read the label and product information before use.

Veterinary surgeons - this product can be ordered through your wholesaler, or contact us for ordering information

What is F10®CLXD used for?

  • Effective cleansing whilst reducing the microbial load.
  • Cleaning and disinfection of: floors; walls; tiles; kennels/cages; food and drink bowls; bedding; tables and basins

The recommended dilution rates of F10®CLXD

  • General disinfection at 1:100 (10ml in 1 litre)
  • High level disinfection against bacteria, fungi and most viruses (including coronavirus) at 1:50 (20ml to 1 litre)
  • For use against the most resistant viruses such as Parvovirus or PBFD at 1:25 (40ml in 1 litre)

These dilution rates mean that F10® is one of the most cost-effective disinfectant ranges on the market.

How to use F10®CLXD

  • Clear away any debris, and rinse with water
  • Add the required amount of F10®CLXD to 1 litre of water - i.e. to create a dilution rate of 1:50 add 20ml*
  • Spray or wash the surfaces/object using the solution
  • Due to the cleaning detergent contained in F10®CLXD, any food bowls or instruments that are to come in close contact with animals should be rinsed with clean water to ensure no soap residue is left
  • Once cleaned, spraying with F10®SC or F10®CL solution, and then allowing to air dry, will ensure continued disinfection

* 1:50 is recommended for efficiency against most pathogens. If more resistant viruses are known to be present, use at 1:25 (40ml/litre). For general disinfection use at 1:100 (10ml/litre).

Related products

F10®SCXD Veterinary Disinfectant

F10®CLXD in a more concentrated form (1litre SCXD is the equivalent of 5 litres of CLXD)

F10®CL Veterinary Disinfectant

A broad spectrum disinfectant, effective against all types of pathogen, without cleaning detergent

F10® Disinfectant Ready to Use

F10®SC pre-diluted at 1:250, so can be used straight from the bottle

What's the difference between F10®CLXD and F10®CL?

F10®CLXD is a disinfectant cleanser, and the added detergent means you can clean and disinfect in a single step. F10®CL is just a disinfectant.

F10®CLXD helps by removing the organic matter allowing the disinfectant to act against the pathogens with less interference. F10®CL works better on clean surfaces, but has the advantage that it can be left to air dry without leaving a soapy residue.

There are therefore situations where F10®CLXD or F10®CL may be more appropriate than the other for the task you are undertaking. More information is available in the adjacent video - if it is not displayed please enable cookies, or watch it on YouTube.

Which should I choose? CLXD or SCXD?

Whichever you are more comfortable using, the resulting disinfection performance will be the same. Some feel the CLXD is better for them as you need to be less precise with the measuring (for high level disinfection you would use 20ml in 1 litre of water, whereas you would only use 4ml of SCXD in 1 litre of water). Whereas others prefer the smaller bottle of the SCXD.

For further information on the difference between SC products and CL products see our video.

More information about this product

We are happy to help, and advise on the use of this product and how it can fit with your hygiene regime. Please contact us for any information.

The F10 product range is developed and manufactured by Health and Hygiene (Pty) Ltd in South Africa.

  • Safety data sheet for F10CLXD Veterinary Disinfectant/Cleanser (data relates to product in its concentrated form) 

Almost all plastic elements used in the packaging of F10® products are made from HDPE 2 materials and are widely recycled. This includes the bottles, caps, pumps, sprays, tubes and tubs.